Double click on above image to view full picture
More Views
The Stilo is a simple metal and hardwood space saver staircase kit made by an Italian company called Ehleva. The build quality is reasonably good and it is a fairly straight forward job to assemble it. Assembly can usually be carried out in a single day using standard tools.
The Stilo can be arranged into many different formats such as a straight flight, an L shape or a U shape, and so can be adjusted to suit most houses. For more information please read the height and layout tab. Otherwise the most common queries about the Komoda modular staircase kit are:
What comes in the box?
Treads
Carriage modules (to form the steel structure) with top and bottom fixing plates
Handrail
Balusters
Two wall brackets
Support column
Written installation instructions and a DVD showing the assembly
What are the main parts made from?
The treads and handrail are made from beech (a good quality hardwood). They have been factory finished with two coats of a tough polyurethane varnish. This can either be a clear varnish or varnish mixed with a dark stain.
The balusters, carriage modules, fixing plates and support column are made from steel. They are powder coated and coloured either white, grey or black.
How can I tell if it will fit my house?
You need to take a few measurements and then carefully read the information we give on heights and layout and fixings. If you have any questions please do not hesitate to call our technical sales team on 0800 098 8778. We're here to help!
How is the delivery made?
The Stilo modular staircase is supplied in kit form. It is shipped in a large plywood box on a wooden pallet and depending on the number of treads ordered there may be a few smaller cardboard boxes as well. The delivery is made using a large vehicle with a tail lift and a pump truck because the main box is too heavy to be lifted by hand. The driver will take the goods off the lorry and deliver them to the roadside outside your property, or as close as possible if you live on an unmade road. From there you will need to bring them into the building. If you need to do this by hand you can do so only by opening the box and carrying in the pieces inside. It is not possible to move the complete box by hand as it will weigh at least 240kg.
Will my new staircase meet building regulations?
Unfortunately it isn't possible for us to give you a simple yes or no answer to this question because there are different requirements for stairs depending on the envirorment where they are used. For example the rules applied to a staircase in a private house are different than those applied to a staircase in a shop or public place. Approved Document K from the Building Regulations explains what the requirements are but there are lots of factors to consider so if you need please contact our technical sales team on 0800 098 8778. Remember that it's your responsibility to determine whether or not your installation is subject to the Building Regulations.
Accessories for the Stilo modular staircase
In addition to the Stilo modular staircase kit there are some accessories available which you might need to finish your job. They are:
Riser bars for the Stilo modular staircase kit by Ehleva
Riser bars are horizontal steel tubes which fit between the treads for the safety of small children. You should fit them if children under the age of five are likely to have access to the staircase.
For more information on riser bars for the Stilo modular staircase kit please click here
Second side raking balustrade kit for the Stilo modular staircase kit by Ehleva
The Stilo modular staircase kit comes with enough balustrade to go along one side (the well side) of the staircase only. If you need balustrade on both sides of your stair then you need to buy some of these kits as well as your staircase.
Landing balustrade kit for the Stilo modular staircase kit by Ehleva
The Stilo modular staircase kit comes with enough balusters to go along one side of the staircase only. It does not come with any balustrade to sit on the upper floor. The collective name for the handrails, balusters etc that sit on top of the upper floor is landing balustrade. If you need landing balustrade you must buy it seperately. It is sold in kits 1 metre long.
| Delivery time | 15 working days |
|---|---|
| Main materials | Wood and metal |
| Balustrade style | Standard |
| Handrail material | Wood (rigid) |
| Treads | Wood material: Solid Beech, block laminated Thickness: 40mm Graded for evenness of colour: No Finish: Two coats of varnish Colours: Light or dark |
| Handrail | Material: Hardwood (beech) Flexible or rigid: Rigid Size and profile: 50mm diameter, circular Finish: Two coats of varnish Colours: Light or dark |
| Balusters | Wood material: Solid Beech, block laminated Thickness: 40mm Graded for evenness of colour: No Finish: Two coats of varnish Colours: Light or dark |
| Handrail to baluster connectors | Material: Hardwood (beech) Flexible or rigid: Rigid Size and profile: 50mm diameter, circular Finish: Two coats of varnish Colours: Light or dark |
| Handrail to handrail connectors | Material: Plastic Finish: N/A Colours: Black or Grey |
| Centre carriage | Material: Plastic Finish: N/A Colours: Black or Grey |
| Instructions supplied | Written and DVD |
| Accessories available | Colours: White, black or grey Finish: Powder coated Material: Steel |
